HIGH PERFORMER
5W-30 SAPS C1 Ford+Mazda+Volvo

Price incl. VAT
Plus Shipping
In Stock

1 l Can   €6.31 per Liter
Min order quantity
€6.31
1 l Can   €16.84 per Liter
€16.84
5 l Can   €4.84 per Liter
Min order quantity
€24.18
5 l Can   €8.22 per Liter
€41.12
20 l Canister   €5.19 per Liter
€103.79

Product details

5W-30 SAPS C1 Ford+Mazda+Volvo

High Performer Ford/Mazda Motor Oil 5W-30 C1 SAPS for particulate filters, a low-viscosity motor oil based on HC-Synthesis base oils for modern petrol and diesel car engines, tailored specifically for the needs of engines which require low-SAPS and require an oil approved by ACEA A5/B5 or C1. It aims for the car and light transporter with car engines market.

This friction wear reducing motor oil guarantees on one hand a quick lubrication at low temperatures, and a nicely thick lubricating sheen at oil temperatures exceeding 160° Celsius on the other. It ensures the compliance with the viscosity class even at longer oil durations over the entire change interval (HTHS 3.0).

Specifications:

  • ACEA A1/B1, A5/B5-04, C1 - 04 (low - SAPS motor oil)

  • Ford

  • Mazda

    High Performer 5W-30 C1 SAPS fulfils even the ACEA A5/B5 specifications, underlining its fuel economy. The reason of this is its optimum base oil composition and the low sulphate ash content (max. 0.5%) coupled with low TBN (total base number). All this helps extend the service life expectancy of the exhaust treatment system, eg. in three-way catalytic converters, minimize the deposits in the diesel particulate filter (DPF) and lower the overall gas emissions.

    In practice, a number of interesting differences compared to usual oils can be observed:

  • Because of its HC-Synthesis base, this motor oil shows a lot tendency to evaporate corresponding to its viscosity, which has a significant effect on fuel and oil economy.

  • The additives used offer security against sludge formation, koking, laking and corrosion, even under difficult conditions.

  • The function of the hydraulic tappet is ensured at all temperatures.

  • Quick lubrication of the engine, even at temperatures below -25° Celsius

  • The oil leaves no deposits in the combustion chambers, the piston ring area and on the valves.

  • Is neutral towards sealing materials.

    Attention:

    Please note the manufacturer's information regarding high viscosity oil and mixing! This product can generally be mixed with all commercial motor oils, without necessarily requiring flushing. It is recommended, however, to be cautious in areas where fuel with a higher sulphur content is commercialized; please also note the special instructions from aggregate manufacturers.

Safety Advice GHS

Risk Phrases:
H412: Harmful to aquatic life with long lasting effects

EUH208: Contains . May produce an allergic reaction.


Safety Advice:
P103: Read label before use.
P273: Avoid release to the environment.
P501: Dispose of contents/container to ...



Gebrauchsnummern 14814090
14814091
14814092
14814093
14814094
18192
18193
18194
18195
18196
Field of operation Car
Release ACEA A1
ACEA A5
ACEA B1
ACEA B5-04
ACEA C1-04
Viscosity 5W-30
Characteristics Low-viscosity oil
Particulate filter
EAN/GTINs 4032167181939
4032167181946
4032167181953
4032167181922
4032167181960

Reviews

Back To Reviews

Write a Review

Hinweise zur Altölentsorgung in Deutschland

Unsachgemäße Beseitigung von Altöl gefährdet die Umwelt. Deshalb holen wir Dein gebrauchtes Verbrennungsmotoren- oder Getriebeöl gern kostenlos bei Dir ab.

Unter der Email-Adresse
entsorgung@delti.com kannst Du die Abholung des Altöls und der Gebinde anmelden.

Bitte beachte, dass die Rückholmenge nicht die erworbene Menge übersteigen darf und Du dich unter Angabe der Auftragsnummer an uns wenden kannst. Bitte verpacke die Gebinde in einer Umverpackung und verschließe die Kannen sorgfältig, so dass ein Ölaustritt ausgeschlossen ist.

Die Rückgabe von Altöl ist grundsätzlich auch an Tankstellen oder bei Wertstoffannahmestellen (z.B. Recyclinghof; evtl. gegen eine Gebühr) möglich. Ob Deine örtliche Wertstoffannahmestelle Altöl annimmt, erfährst Du in der Regel vor Ort oder bei der zuständigen Gemeindeauskunft.

Dieser Hinweis und die Regelungen gelten entsprechend auch für Ölfilter und für beim Ölwechsel regelmäßig anfallende ölhaltige Abfälle.